The Ahad

FAQ

Find the answers to your questions here!

      1. In the gadget Setting menu, select the APP QR code to scan with Android phone or iPhone to download Ahad PRTE App, or Download App.
      2. Once downloaded, place gadget closely (< 50 cm) to smartphone, then open Ahad PRTE App. If Bluetooth not connected, will a prompt message to go to Settings for connection first. Also, for Location, need to tap Allow While Using App (to sync Time and Date whereabouts). Once Bluetooth connected, return to Ahad PRTE App and tap PRTE (bottom right) to Connect then Pair.
      3. Once connected, shown a flashing message “There is a new version available, please click to upgrade” to be tapped. However, if the battery in gadget below 50%, will then show a notification message at the bottom part to recharge first so that not to corrupt the software. Additionally, ensure the smartphone power is not below 20%, also, please do not set to power saving mode in smartphone, so that Bluetooth remains connected even if the screensaver automatically turns off during the upgrading process to avoid damaging the software as well. Then, tap the green checkmark “Confirm” to download the updated software which will take about 5 to 8 minutes.
      4. Once upgrade completed, tap at OK. Then, may or may not show Kind Reminder message, to go to Bluetooth settings. If shown, tap OK, in Bluetooth then select “Forget Device/Unpair” at PRTE until no more PRTE seen, then return to Ahad PRTE App and tap PRTE. But, if not done as the message said, then a red crossmark (x) will be displayed then go to FAQ before proceeding.
      5. Before tap Connect, turn the gadget back On first followed by a display “Kalibrasi (Calibration) sensor”, then tap at “Ya (Yes)”, once calibrated, then tap “Tidak (No)”. Next, select the Language preferred then tap Berikutnya (Next), also select the Mode preferred then tap Berikutnya (Next). At this point, the gadget is ready to be synched, by tapping Connect then Pair, then tap Allow for Notifications. Congratulations! Ahad PRTE App and gadget have been successfully synchronized, shown that the current Time and Date in the gadget is automatically adjusted to the local whereabouts.
      6. Once the software is updated, tap on gadget above Add Photo to change the screensaver to Personal screensaver with 2 options: Take Photo or Choose from Album. Need to tap Allow Access to All Photos for acessing photos from smartphone. Also, there are 3 duration settings that can be selected by swiping right or left. These settings automatically turn off the screensaver (s = second) or the gadget (m = minute) according to the user’s preference. The default settings are to save battery.
      7. Tap Salah Time for adjusting salah times based on the listing of Government agencies or Islamic organizations in the destination country. If none on the listings, then choose the salah times that are similar. Prayer times are computed using astronomical methods that determine the sun’s position, primarily through longitude, latitude, and solar declination, therefore have some slight discrepancies. As a Note in the User Manual, it is recommended to wait for an additional 10-20 minutes, and make sure by double checking with the salah times in the local region and country whereabouts before salah for the first time.
      8. Smart mode is the most practical of the 3 modes given where no need to think anymore about choosing the number of rak’ah or type of salah which can be mistakenly chosen. Simply turn On PRTE, will automatically switches directly to that current salah time zone such as Fajr, Duha, Dhuhr, Asr, Maghrib, and Isha, then just tap Yes or No for Qabliyah (except Duha).

PRTE is an advanced portable electronic gadget, designed in a mini portable size that only needs to be touched with a palm to precisely count the number of rak’ah during salah to achieve solemnity, also includes a tasbih digital for dhikr with recitations and is equipped with educative contents such as:

Islamic Law and Miracle of Quran
Dhikr with Tasbih
Daily Prayers
Asmaul Husna Dhikr
Islam and Quran
Yasin and Prayer
Tahlil and Takbir
Salah Reading Guide
Kindly refer [User Manual (pdf)].
  • Consistent – powered by PLSi sensor technology ensures the counting always accurate.
  • Smart mode – automatically counts Qabliyah and Ba‘diyah for the 12 Sunnah Rawatib, and automatically adjusts to the type of salah by means of scanning APP QR code in the Setting menu to first download Ahad PRTE App. Moreover, also functioning to change factory screensaver to personal screensaver like private photo.
  • Portable and Practical – mini-sized, lightweight, and easy to carry anywhere.​
  • Elegant Design – slim, modern, and user-friendly.

Yes. It is powered by intelligent PLSi sensor technology, ensuring accuracy and reliability in counting rak‘ah.

“Educative” means intended to teach or enlighten. The purpose of these contents is not only to be read or memorized as educational material, but also to be practiced in daily life as good habits – spreading the greatness of Islam and the Quran, revealed by ALLAH SWT through Angel Jibril to the Prophet Muhammad SAW.

Because of facing ALLAH SWT when salah is obligatory to be clean, therefore is necessary to keep the face clean and in avoiding contract diseases if the floor is not kept clean, as well as protecting from excessive heat or cold. Furthermore, if it is sunnah like the Prophet Muhammad SAW to smell good, then this folding face prayer mat can be perfumed to maintain its fragrance. Additionally, there is a pocket in the folding face prayer mat to have money always available so that not forgetting to donate.

Comfortable color for the eyes so as not to dazzle for maintaining solemnity in salah.

The green color indicates the last rak‘ah of each obligatory or sunnah salah, signaling completion with clarity and certainty.

Make sure Pocket Icon is Blue (Product reference) or Active, and make sure the Mukena or Glove is not too thick, or the mukena is rolled up in the user’s hands, due to the use of sensor that must be touched. If the hands are damp, it will also cause inconsistent counting of rak’ah.

Make sure Pocket Icon is Black (Product reference) or Inactive to reduce sensitivity.

Press the multifunction button on the right side twice to return to the screensaver and select the desired one.

Ensure the Bluetooth is On, and in the App Settings on the smart phone, permissions for accessing the Camera, Photos and videos, and Location are selected. If the error persists, as with any other electronic gadgets, reset the Ahad PRTE by turning it Off (keep pressing multifunction button for 10 seconds) and then turning it back On to clear its memory and cache.

Once connect the gadget to the Ahad PRTE App, please make sure the Power off Time(m) is not set at 1 minute or all the way to the left. It is better set at 15-20 minutes to save battery.

At this given time frame until Duha which is approximately 30 minutes indicates that salah is forbidden.
(Note: If not shown “Sunrise”, then need to upgrade the latest firmware by following instructions in How to download Ahad PRTE App).

For Android phone, go to Settings in Bluetooth, then in PRTE, do “Unpair” to disconnect. After not seen PRTE anymore, then go back to Ahad PRTE App, and Connect again. Also if necessary, turn Off then On, or restart gadget.

For iPhone, go to Settings in Bluetooth, then in PRTE, do “Forget This Device” to disconnect. After not seen PRTE anymore, then go back to Ahad PRTE App, and Connect again. Also if necessary, turn Off then On, or restart gadget.